2019 High quality 1000W Metal Stainless Steel Fiber Laser Cleaning Machine Rust Removal

Short Description:

Pulsed fiber laser cleaning machine is the use of laser-generated vibration principle to clean the workpiece,  the surface damage to the workpiece is very small, while the traditional laser cleaning machine technology is the use of nanosecond or picosecond pulsed laser irradiation to be cleaned workpiece surface, making the workpiece surface in the instant absorption of focused laser energy, the formation of rapidly expanding plasma (highly ionized unstable gas), so that the surface of the oil, rust spots, dust slag, coating, oxide or film layer vaporization or stripping


Product Detail

Product Tags

“Based on domestic market and expand abroad business” is our improvement strategy for 2019 High quality 1000W Metal Stainless Steel Fiber Laser Cleaning Machine Rust Removal, We’re going to empower people by communicating and listening, Setting an example to others and learning from experience.
“Based on domestic market and expand abroad business” is our improvement strategy for China Clean Laser Machine Price and Laser Cleaning Machine Price, Many years of work experience, we have now realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .

PARAMETER

Laser power

 100W/ 200W/500W

Laser source type

Raycus, IPG for option

Laser wavelength

1064 nm

Cooling method

Water cooling

 Cooling water

Deionized water

 Water temperature

18-22 °C

Scan width

10-60 mm

Auxiliary gas

Compressed air/Nitrogen

Air pressure

0.5-0.8 MPa

Optional accessory

Handheld / Manipulator

Working condition

5-40 °C

 

FEATURE

  1. Accurate laser cleaning for exact position and precise size.
  2. Flexible operation for work pieces with complicated geometric construction can be realized by hand-held laser cleaning head.
  3. Widely applied in flat, curved and three-dimensional surface for work piece of elastic material and plastic with very small and deep holes.
  4. Safe & environment-friendly. Without using chemical detergent or other consumables
  5. Non-contact cleaning and no damage for substrate Extremely.
  6. Easy to operate, with portable mode and could be equipped with robot for automatic cleaning
  7. No maintenance and no consumables, dust-free, no chemicals, no pollution.
  8. Low cleaning cost and High cleaning efficiency.

APPLICATION

Metal surface rust removal
Surface paint cleaning
Surface oil stain/contaminant cleaning
Coating surface cleaning
Welding / coating surface pre-treatment
Stone figure surface dust & attachment cleaning
Plastic mould residues cleaning

DETAILS

csc-5
csc-1
csc-6
csc-3
csc-2
csc-1

PRINCIPLE

The difference between continuous laser and pulse laser cleaning:
After pulsed light cleaning, the paint layer on the surface of the sample is completely removed, and the surface of the sample appears. Metallic white, and almost no damage to the sample substrate. After cleaning with continuous light, the paint layer on the surface of the sample was completely removed, but the surface of the sample appeared gray-black, and the substrate of the sample also showed micro-melting. Therefore, the use of continuous light is more likely to cause damage to the substrate than pulsed light.
Both continuous laser and pulsed laser can remove the paint on the surface of the material to achieve the effect of cleaning. Under the same power conditions, the cleaning efficiency of pulsed lasers is much higher than that of continuous lasers. At the same time, pulsed lasers can better control heat input to prevent excessive temperature of the substrate or micro-melting.
Continuous lasers have an advantage in price, and the gap in efficiency with pulsed lasers can be made up by using high-power lasers, but high-power continuous light has greater heat input, and the damage to the substrate will also increase. Therefore, there is a fundamental difference between the two in application scenarios. For applications with high precision, strict control of the temperature rise of the substrate, and non-destructive substrates, such as molds, pulsed lasers should be selected. For some large steel structures, pipelines, etc., due to the large volume and fast heat dissipation, the requirements for substrate damage are not high, and continuous lasers can be selected.
Advantages of pulsed lasers:
Pulsed lasers generate less heat, while continuous lasers generate more heat, which is why high-power lasers use pulses. Pulsed lasers can make the laser generator rest intermittently, while continuous excitation can only make the laser continuously and uninterrupted. work, it is easy to shorten the life of the laser generator.

SAMPLE

SAMPLE

VIDEO


“Based on domestic market and expand abroad business” is our improvement strategy for 2019 High quality 1000W Metal Stainless Steel Fiber Laser Cleaning Machine Rust Removal, We’re going to empower people by communicating and listening, Setting an example to others and learning from experience.
2019 High quality China Clean Laser Machine Price and Laser Cleaning Machine Price, Many years of work experience, we have now realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .


  • Previous:
  • Next:

  • Write your message here and send it to us