The maintenance of laser marking machines generally includes daily maintenance; regular maintenance; regular mechanical inspection and precision inspection; equipment lubrication and cooling system maintenance is also an important part of equipment maintenance; daily maintenance of laser marking machine cleaning is the basic work of equipment maintenance; this needs to be institutionalized and standardized.
In order to keep the laser marking machine in good operating condition, the laser marking machine should be maintained regularly. The maintenance requirements of the cooling system of the laser marking machine are as follows.
1. Check the water circuit joints for signs of looseness and leakage every time you start the machine. If there is any leakage, quickly press the emergency stop switch for maintenance.
2. Keep the internal circulating water clean and observe whether the circulating water is deteriorating every half a month. Laser marking machine, change water regularly according to the water quality and replace the filter element. If the water pump flow is too low after changing the water, it is caused by air blockage in the water pump. Press the red button on the water filter to exhaust the air in the water system. After the water flow is normal, the mixing of gases in the water circuit will reduce the transmittance of the water, affect the laser power, and reduce the water flow. There are bubbles or water tanks in the transparent hose.
3. Remove dust from the air filter regularly. When there is too much dust, remove the filter and use an air spray gun, water pipe, etc. to remove the dust on the filter. After taking it out, let the filter dry and then put it back. Generally clean it once every 2-4 weeks. If the dirt is serious, the laser marking machine can be cleaned from time to time with a neutral detergent. Frequent cleaning of the air filter can extend the life of the water cooler and reduce the power consumption of the compressor.