It is very important to use the fiber laser cutting machine correctly. You must master the skills of using the fiber laser cutting machine and follow the instructions, and operate it strictly according to the fiber laser cutting machine tutorial.
Before use, check whether the power supply voltage is consistent with the rated voltage of the machine to avoid unnecessary damage. Check whether the exhaust pipe is placed at the outlet to avoid obstructing air convection. Check whether there are other foreign objects on the machine table. Before clarifying the processing material, refuse to use laser for irradiation and processing. After the fiber laser cutting machine is started, there must be a full-time staff on the scene, and they cannot leave without authorization. If they need to leave, they should turn off the equipment. Personnel operating the equipment must be trained by the fiber laser cutting machine manufacturer before they can take up their posts.
When processing materials, you must wear necessary protective equipment, such as protective glasses. The laser cutting machine equipment must be cleaned in time after use to prepare for the next processing. It is strictly forbidden to open the laser cover during the operation of the laser. It is strictly forbidden to wear metal objects when operating, which may cause electric shock. It is strictly forbidden to stack flammable items such as paper and oil in the processing area of the laser cutting machine. Regularly check consumables such as laser tubes and auxiliary gases. There should be fire extinguishers and other equipment near the laser cutting machine. During the processing, if any abnormality is found, the machine should be stopped immediately, and then a special person should be found for inspection. When the laser cutting machine is working, you should pay attention to observe every detail of the machine tool to see if there is any abnormality. Laser is invisible light, which can cause serious damage to the eyes. It is strictly forbidden to look directly at the laser beam.